|
|
|
|
|
|
Condor Elbow Pad
|
Our Price: $14.99
|
|
|
1/2" density foam padding
Non-Slip rubber cap
Daul Velcro fastener
Unit Weight: 1lbs
|
|
|
|
|
|
|
|
|
|
|
|
|
Condor Knee Pads
|
|
Our Price: $19.99
|
|
|
1/2" density foam padding
Non-Slip rubber cap
Daul Velcro fastener
|
|
|
|
|
|
|
|
|
|
|
|
|
NIJ Certified Level III Steel Rifle Plate - Front "Shooters Cut"
|
|
Our Price: $150.00
|
|
|
This is a FRONT PLATE ONLY! "Shooters Cut" clipped top corners for best buttstock placement and ergonomics.
Our NIJ Certified Level III Steel Plates are made from specially formed and treated ballistic steel - over 470 Brinnell hardness.
Stops .308 / 7.62 X 51mm FMJ rifle threats, with or without a vest. Easily stops AK-47 FMJ or Mild Steel Core, 7.62 by 39mm.
Steel is less than half the cost of Ceramic – the tradeoff is that steel is heavier, and more likely to cause bullet splatter, or deflection, than ceramic. (Of course, you'd probably rather take a chance on a deflection hit, than a guaranteed hit to the body!)
Frankly, unless you are on a VERY tight budget, we recommend Ceramic Rifle Plates over Steel to minimize the risk from bullet splatter or ricochet
.Our Steel plates are custom-finished with a black paint.
Please
know that many Eagle, BlackHawk and other plate carriers are not designed
for the more rectangular Back plates (only clipped corner plates even
on the back). You may need to order two Front plates to fit your carrier.
It
is your responsibility to verify compatibility with your equipment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NIJ Certified Level III Steel Rifle Plate - BACK
|
|
Our Price: $150.00
|
|
|
This is a BACK PLATE ONLY! Rectangular with rounded corners. Check to ensure your Rifle Plate Pockets will take the full value rectangular plate.
Our NIJ Certified Level III Steel Plates are made from specially formed and treated ballistic steel - over 470 Brinnell hardness.
Stops .308 / 7.62 X 51mm FMJ rifle threats, with or without a vest. Easily stops AK-47 FMJ or Mild Steel Core, 7.62 by 39mm.
Steel is less than half the cost of Ceramic – the tradeoff is that steel is heavier, and more likely to cause bullet splatter, or deflection, than ceramic. (Of course, you'd probably rather take a chance on a deflection hit, than a guaranteed hit to the body!)
Frankly, unless you are on a VERY tight budget, we recommend Ceramic Rifle Plates over Steel to minimize the risk from bullet splatter or ricochet
.Our Steel plates are custom-finished with a black paint.
Please
know that many Eagle, BlackHawk and other plate carriers are not designed
for the more rectangular Back plates (only clipped corner plates even
on the back). You may need to order two Front plates to fit your carrier.
It
is your responsibility to verify compatibility with your equipment.
|
|
|
|
|
|
|
|
|
|
|
|
|
Condor Knee Pads "2"
|
|
Our Price: $19.99
|
|
|
Description :
- 1/2" density foam padding.
- Non-slip rubber cap.
- Plastic buckle for easy on and off.
Size: One size fits all
Color: OD, Black, Tan, ACU
|
|
|
|
|
|
|
|
|
|
|
|
|
Peltor Tactical 6S™ Hearing Protector
|
|
Our Price: $69.99
|
|
|
Model: 97044
NRR 19dB
Folding, low profile design for easy storage
Electronics limit amplified sounds to 82dB
Distortion-free amplification of low level sounds up to 19dB
Stereo microphones enhance sound localization
Independent volume controls on each cup
|
|
|
|
|
|
|
|
|
|
|
|
|
Peltor Bull's-Eye 7™ Hearing Protector
|
|
Our Price: $22.99
|
|
|
Model: 97006
NRR 27dB - excellent attenuation at low and high frequencies
Soft liquid/foam filled ear cushions
Comfortable
Adjustable headband
Aligns comfortably and easily
|
|
|
|
|
|
|
|
|
|
|
|
|
Condor Compact Plate Carrier
|
|
Our Price: $39.99
|
|
|
- Emergency drag handle
- Side release buckles on shoulders and waist strap
- Compression molded panels
- Easy access to ballistic with pull down flaps
- Accepts standard 10x12 plates
Size : M-XL Adjustable
Color : O.D. Black, Coyote Tan, ACU
|
|
|
|
|
|
|
|
|
|
|
|
|
Condor Modular Operator Plate Carrier
|
|
Our Price: $120.00
|
|
|
Description :
- Genuine Multicam Material
- Material: 1000 Denier Cordura
- Emergency drag handle.
- Detachable shoulder pads.
- Side release buckles on shoulders and internal waist strap.
- Accepts up to 10 x 13 plates.
- Accepts up to 6 x 8 side panel plates.
- Easy access to ballistic plates with pull down flaps.
- Adjustable/detachable cummerbund with pockets for side armor.
- One front map pocket with snap, hook & loop closure.
- All armor compartments (front, back & two side) have hook and loop panel.
- Lightly padded mesh on front and back harness for comfort and airflow.
- Heavy duty webbing covered in multicam fabric.
NTOA Approved
Size :M - XL adjustable
Color :O.D. Black, Coyote Tan, ACU, Multicam
|
|
|
|
|
|
|
|
|
|
|
|
|
Chamber Safety Tool - Rifle
|
|
Our Price: $9.99
|
|
|
The Chamber Safety Tool for rifles is a must for any range bag. As a chamber flag, this tools yellow color clearly shows that the weapon is unloaded and has a strengthened head for increased durability. In addition to serving as a chamber flag, the flattened edge on the corner of the head allows you to adjust the windage and elevation of your scope. The strengthened punch is also designed to push out the takedown pins on your AR-15/M16 without scratching the rifle.
These features make this no ordinary chamber flag. Make sure you have one for each of your firearms. Also available for pistol and shotguns .
|
|
|
|
|
|
|
